MSI Z77A-G45 THUNDERBOLT SUPER CHARGER DRIVER DETAILS:
|File Size:||33.8 MB|
|Supported systems:||Windows XP, Windows Vista, Windows 7, Windows 7 64 bit, Windows 8, Windows 8 64 bit, Windows 10, Windows 10 64 bit|
|Price:||Free* (*Free Registration Required)|
MSI Z77A-G45 THUNDERBOLT SUPER CHARGER DRIVER
- Universal Computers L.L.C.
- VB Computer Shop Catalogus - MSI
- 2012_Q2 all 100
- MSI Drivers
- فروشندگان آنلاین
- MSI announces BIOS updates to enable NVMe compatibility
Wrong installation can damage both the CPU and the mainboard. You can identify the hinge lever as below shown, it with a interlocking feature on the other end. Chapter 1 Hinge lever Active lever Interlock 3.
Open the load plate by pushing down on the hinge lever. Grasp the tab, only it has risen away from the socket, open load plate to full open position.
Aros/Platforms/x86 Complete System HCL
Be sure to hold the CPU by the base with the metal contacts facing downward. Carefully close the load plate and remove the plastic protective cap. Close the active lever with a smooth uniform motion and latch to the socket. Close the hinge lever with a smooth uniform motion and MSI Z77A-G45 Thunderbolt Super Charger to the socket.
This will help in heat dissipation and prevent CPU overheating. Locate the CPU fan MSI Z77A-G45 Thunderbolt Super Charger on the mainboard. Using a screwdriver tighten the four captive screws 9 inch-pounds. Align the mounting plate s mounting stands with the screw holes on the mainboard and secure the mainboard with the screws provided with your computer case.
The locations of the screw holes on the mainboard are shown below. For more information, please refer to the manual that came with the computer case.
To prevent damage to the mainboard, any contact between the mainboard circuitry and the computer case, except for the mounting stands, is prohibited. Please make sure there are no loose metal components on the mainboard or within the computer case that may cause MSI Z77A-G45 Thunderbolt Super Charger short circuit of the mainboard. To connect the ATX pin power supply, align the power supply cable with the connector and firmly press the cable into the connector. If done correctly, the clip on the power cable should be hooked on the mainboard s power connector. Ground V V JPWR3 This connector is used to provide power to the graphics card.
Two DIMM slots provide a single channel. The memory modules can transmit and receive data with four MSI Z77A-G45 Thunderbolt Super Charger bus channels simultaneously to enhance system performance. Please refer the following tables for more details. Always insert memory modules in the DIMM1 slot first. Unlock the DIMM slot by pushing the mounting clip to the side. Vertically insert the memory module into the DIMM slot.
|Dell Alienware Area-51 ALX TSST TS-H653H||Blog Archive|
|ASRock H61DESI Intel Display||MSI A88X-G45 GAMING|
|Dell Latitude E6220 Notebook||Blog Archive|
|Asus VK221D||Shop by category|
|Pioneer DVR-116BXL||Product Listing : MSI|
The memory module has an off-center notch on the bottom that will only allow it to fit one way into the DIMM slot. Push the memory module deep into the DIMM MSI Z77A-G45 Thunderbolt Super Charger. The plastic clip at one side of the DIMM slot will automatically close when the memory module is properly seated and an audible click should be heard.
Manually check if the memory module has been locked in place by the DIMM slot s side clip. Read the expansion card s documentation to check for any necessary additional hardware or software changes.
MSI Z77A-G45 Thunderbolt Motherboard Review Bundled Applications
Graphics Card Installation Table The following table shows the graphics cards installation rules. Super-charger utility on MSI motherboard (z77a-g45). jb0nez Jan 5,PM. This motherboard comes with a utility that supposedly will up the amperage Missing: Thunderbolt. Z77A-G45 Thunderbolt. Product Specifications; Detail; Datasheet. Socket; CPU (Max Support); Baseclock/Hyper Transport; Chipset; DDR3 Memory; Memory Missing: Super Charger.