Type: Driver
File Name: dlink_dir_20106.zip
File Size: 19.3 MB
11 (4.43)
Downloads: 15
Supported systems: Windows 10, Windows 8.1, Windows 8, Windows 7, Windows 2008, Windows Vista
Price: Free* (*Free Registration Required)

Download Now

Download the Generic Broadcom Mini version and the Mega version if you want to install that as well.


Do not try to install the Mega version directly. Testing showed repeated mixed results including two bricks. Testing always succeeded with Mini installed first.

  • D-Link Technical Support
  • DIR Dlink products Configuration And Installation On D-Link Blog Home
  • How to Login to the Dlink DIR
  • D-Link DIR-330
  • Dlink DIR-330 Login Instructions
  • Solutions To Dlink DIR-330 Login Problems

Rename the MINI file to start with 'dir'. If you own a JTAG cable, download version of tjtag as well just in case things go really astray. DLINK DIR-330

Make sure your computer is the only device connected to the router. Port 1 was always connected to for testing. Do a factory reset on the box. DLINK DIR-330 should return to DLink factory setting of If you do DLINK DIR-330 do this worthless step, you will receive a file name error on the next step.

Lenovo ThinkCentre M72e Flash UEFIAdded to Cart
Acer Aspire One 1-131 Intel Serial IOLogin to the Dlink DIR-330 Router

So I guess it has some worth? Eventually, the web browser may say the firmware upgrade is complete and to click continue. Do NOT click the DLINK DIR-330 button, just move on to the next step.

Set your PCs static ip to Try to ping Once stable about 1 mincycle power on the router again. You should now see the blue light flash and come on for only about 8 seconds. You should be able to go back to the browser and type in Enter username and password DLINK DIR-330 as required. The screen says 'Wait', and DLINK DIR-330 mean it. The webpage will count down then stop.

It seems like it may even be hanging. At 9 minutes 30 seconds in, the blue light on the right of the box should come on. At 10 mins, the blue light should be out, and the web page should reload to the Basic Setup Screen. DLINK DIR-330 after 12 minutes you do not see the blue light flash, you can start over, or go to the flash recovery section.

D-Link Wireless G VPN Router DIR - wireless router - b/g - desktop Overview - CNET

DLINK DIR-330 Technically, you are done. Enter info as required. Do a hardware push the button reset to return to defaults. Router should return to Reference the Peacock thread and start over. Telnet into the router - Your patience will be tested.

Warranty & Support

At 8 minutes in, the blue light on the right of DLINK DIR-330 box should come on; at 8 mins 30 seconds, the status light should start blinking. Move on to the next step. If after minutes you do not see the blue light flash, you DLINK DIR-330 start over, or go to the flash recovery section. Do NOT power down yet; unpredictable results may happen.


Skip down to step 25 to test if it accidently DLINK DIR-330. If you can ping the router on Power up the router. Once the router is back up after 30 seconds, you should no longer be able to ping Try to ping address - Still no success or changes? Proceed to JTAG section.

If you can ping Free support for this product will end on 04/01/ DIR NetDefend SOHO VPN Router 4-Port 10/ Switch. Downloads; FAQs; Videos; Specifications. DLINK DIR-330 Used and Save: Buy a Used "D-Link DIR NetDefend G Wireless VPN Fire " and save 30% off the $ list price. Buy with confidence as the.

Related Drivers